|
|
|
|
|
Below are a list of our current available reproduction pieces Click on any link for a picture of the specific product. 1971 1972 1973 FORD MUSTANG and COUGAR CONSOLE CLOCK LENS
NEW TOP QUALITY REPRODUCTION CLEAR LENS FOR THE CONSOLE MOUNTED 1971-3 MUSTANG AND COUGAR CLOCKS $49.99
CONCOURSE CORRECT REPRODUCTION WITH CORRECT RED FINISH EXACT TO ORIGINAL FORD C8OZ-7583-A SPECIFICATIONS $14.99 EACH
FAIRLANE CLUTCH Z-BAR ENGINE
SIDE BRACKET FITS
FORD PART # C7ZZ-7542A THIS BRACKET ATTACHES TO THE (2) STUDS ON THE FIREWALL THAT HOLD THE PARKING BRAKE ASSEMBLY. THIS BRACKET IS USED WITH ALL ENGINE COMBINATIONS. $34.95
1971 - 1973 FORD MUSTANG HOOD PIN RADIATOR SUPPORT BRACKETS BRIGHT ZINC PLATED $125.00 PAIR 1965 - 1966 Mustang or Shelby Fastback and 1967 - 1968
Mustang or Shelby Fastback
Headliner Retainer Wires. These are the wires that install the
headliner and hook from the headliner to the rear window opening. These
are made specifically for Fastback models - Most outlet houses only stock the
coupe units which are much shorter. $14.99/pair......... 1967 - 1970 Mustang Shelby Cougar 390/427/428CJ
Engine Block
Plates - $125.00/pr PROPER
Reproductions Just like the Originals......... 1971-1973 Mustang Hood Pin Brackets
- These are the brackets that mount to the radiator support and hold the catch
plates for the Mach 1 style hood pins $95.00........ Rimblow Inserts Aluminum
Fit 1970 - 1973 Ford Rimblow Steering Wheel Pads $20.00 ea. / $55.00 set of 3.. Rimblow Inserts Plastic
Fit 1970 - 1973 Ford Rimblow Steering Wheel Pads $20.00 ea / $55.00 set of 3.......... 1970 Mach 1 Rocker Bright Trim
- Proper 6 piece trim set for the rocker panel moldings on 1970 Mach 1 Mustangs.
All 6 pieces are unique and properly made to mount on your original rocker
panels $295.00............. Folddown Side Latches - Both 1967 - 1968 and
1969 - 1970
Mustang Fastback style in stock, Fit Fastback with Folddown rear seat $95.00/pr.... Folddown Side Latch Knobs
- Both 1967 - 1968 and 1969 - 1970 models in stock $10.00/ea
Space Saver Spring
- Proper for Mustang Space Saver Equipped models mounts around canister to lock
it in place. Proper Replacement $19.95.... 1970-1973
Toploader Hurst Backup Switch w Clip - Fits 1970 through 1973 Toploader 4
speed applications - MUSTANG TORINO COUGAR ALL MODELS with Factory Hurst Shifter
Replaces Ford part number D0ZZ-15520-A $125.00......... Torino Shaker Plug
- Fits into 1970 1971 Torino Shaker Hood Scoop Top - All Engines $45.00.....
Throttle Cable Bracket
Mounts to intake manifold to hold throttle cable $45.00......... APPLICATIONS: 1969 - 1970 302/351W/351C 2v or 4v 1969 390/428CJ 1969 1970 Boss 429 DOES NOT FIT 1970 428CJ.
BOSS 302 Throttle
Cable Bracket also available - Please order Boss 302 specifically as it is
unique. $55.00...... 1965-67 Woodgrain Steering Wheel Horn Contacts (USA MADE)
Mounts under the wheel on 1965 - 1967 deluxe and pony woodgrain steering wheels
- Mustang Fairlane etc.. $75.00/pr..... 1970-1971 Torino 429SCJ Shaker Base Bracket - Unique to 1970 1971 Torino models with 429SCJ Shaker Base $79.95....... 1970-1971 Torino 429CJ Shaker Base Bracket
- $49.95......
1965-1970 Mustang Folddown
Catch Striker Plate - Fits 1965-70 models and almost always missing! $34.99..... 428 Cobra Jet/Super Cobra Jet Power Steering Pulley: Fits 1968 1/2 1969 1970 and GT-500 P/S Models without Air Conditioning Proper reproduction with the 80B stamping $250.00........
1967 - 1970 Mustang / Cougar 390/427/428CJ $16.95....
1967 - 1968 Mustang / Cougar 289/302 $16.95................
1969 - 1970 Mustang / Cougar 302/351W/351C/Boss 302 $16.95......
1966 - 1969 Fairlane / Torino / Ranchero / Cyclone / Montego ALL ENGINES
$45.00...
1971 - 1971 Mustang / Cougar ALL ENGINES $65.00.... 1963 - 1964 427 Galaxie
- Also fits 390 when running the 427 Style Exhaust Manifolds for proper
clearance $295.00..... Boss 302 Clutch Equalizer Bar - Proper Reproduction Just like the originals $195.00
Small Block Adjusting Rod Swivel $20.00 1971 - 1973 Mustang / Cougar 302 351C Adjusting Rod - Goes from Clutch Z-Bar to Fork $25.00 Bell Housing Clutch Fork Pivot - Mounts into the bell housing that the fork clips to on 1968 and later Ford applications. Fits both big and small block applications $25.00 Clutch Fork Retainer Spring - Spring Clip that mounts in the fork in Pre 1968 Ford models $9.99 1967-70 Mustang 429/460 and Boss 429 Engine Side Z-Bar Bracket w bushing clip and felt washer $95.00 1965 - 1970 289/302 Engine Side Z-Bar Pivot w Washer, Bushing and Clip $25.00 Small Block Adjusting Rod - 1969 1970 302, 351W, 351C, Boss 302 $14.95 - Also available are a small supply of NOS Ford units $45.00/ea. C9OZ-7521-A 2 Piece Z-Bar Mounts $20.00/pr 390 427 428 Clutch Fork Adjusting Rod APPLICATIONS: 1966 - 1971 Fairlane Torino Cyclone Montego 1967 - 1970 Mustang or Cougar 390 428CJ Boss 429 Shelby GT-500. Also available are the Adjusting Ball that mounts to the rod and connects it properly to the clutch fork Assist Spring Bushing - 1961 - 1968 Ford models $35/pr (Each vehicle requires 2)
1970 - 1971 Ford Torino Fairlane Ranchero 351C 1970 - 1971 Ford Torino/Fairlane/Ranchero 429 N CODE 1970 - 1971 Ford Torino Fairlane Ranchero 429CJ/429SCJ 1968 1969 Ford Fairlane Torino Ranchero 428CJ/428SCJ 1967 1968 1969 Ford Fairlane Torino Ranchero 390GT |
|
FOR WHOLESALE INFORMATION ON ANY OF OUR PEROGIE REPRODUCTION PARTS PLEASE CONTACT STEVE AT GPerogie@aol.com. THANKS FOR YOUR INTEREST. |
|
